Wood Finish Store

Teak Sealer

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • #1 Teak Sealer 100% Satisfaction!

Teak Sealer

Email to a Friend

Availability: In stock

Add Items to Cart

Quick Overview




Primo "Teak Sealer " is excellent for sealing teak wood. Some say Primo Teak Sealer is the most durable sealer for teak wood in the world.  Primo Teak Sealer is an extremely durable, translucent, protective wood finish for interior and exterior use. Primo Teak Sealer provides a flexible, breathable finish with extreme ultraviolet and weathering protection for Teak.

 Color: Teak-Tone color

 Size: 1 Quart (946 ml)

Goes on smooth to leave a flawless finish that will hold up under the toughest conditions. Fast, even coverage, UV fade protection and water repellent. Dries to touch in 30 minutes, dries to handle in 24-48 hours.


 •               Easy to use- single component Epoxy Oils 


•               Long Lasting Marine Grade 


•               UV fade protection & Water repellant


•               Teak Color pigment, natural teak look


                Money Back Guaranteed!! *  If you are not happy with Primo Teak Sealer, Return the product for a full refund. 

Product Description

We Also Recommend

Product Tags

  • Primo Teak Sealer is the best in the business. Durability and ease of application have made Primo Teak sealer the best in the business with a satificied customers.  This is a ALL-IN-ONE product that combines a natural teak stain color with a strong protective epoxy sealer, designed especially for teak. 

    Easy to use oil formula provides a flexible / breathable finish that will not chip or peel. Primo Teak Sealer  replenishes the depleted natural oils in the wood and return the warm glow to your furniture, garage door and outside wood.

    • Epoxy Protection Sealer

    • Natural "TeakTone" Stain 

    • UV fade protection & Water repellant

    • Teak Color pigment, natural teak look

    Primo Teak Sealer represents a new generation of multifunction wood coating technologies for harsh outside environments. Primo Teak Sealer offers weather protection for teak and outside woods with easy application and re-application for maintenance.

    Excellent on hardwoods like Ipe, Teak, Balu and Mahogany, but is also an excellent choice on PT Lumber, Cedar and Redwood.

    Product Description:  Simi Transparent, Flat / Satin finish sealer 



    1. Remove lid and stir until completely mixed in can. (Do not shake)

    2. Make sure wood is dry and free from dust. Apply with an Application pad, long haired natural bristle brush or HPLV cup sprayer. Keep wet edges to prevent lap marks. (Do not apply in hot sun or wet weather. Only apply when surface and air temp is 50 F/10 C to 95 F/35 C.)

    3. For best performance we recommend a total of 2-3 coats with additional top coat of Clear Shield. Allow 24 hrs drying time between coats.

    4. For Smooth finishes allow 24 hours and lightly scuff surfaces in-between coats, use only a nylon scuffing pad (do not sand between coats)

    5. Clean brushes with mineral spirits or paint-thinner. Difficult stains may be cleaned with acetone or paint-thinner. Use soap and water to clean hands.


    Surface should be clean, dull and dry before application. Remove gray, mildew or dirt before applying product. Penetrates best on new wood that is exposed to outdoor elements for 1-2weeks prior to staining or sealing. WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the national lead information hotline at 1-800-424-LEAD or

    If wood has a previous coating or is gray it must be cleaned prior to application of new coating.

    1. The best method to preparing wood surfaces is to sand with 80-150 grit sandpaper. Another alternative to sanding is to use example. Remove Gray on wood with a (TSP) solution or chemical brightener.

    a. Wet surface with clean water, do not let surface dry.

    b. Wash wood with 4 ounces of Powdered Tri-sodium Phosphate (TSP) or a phosphate free substitute with one gallon of water.

    c. Scrub surface with synthetic steel wood or a hard bristle brush and let solution sit on the wood for 10-15 minutes. (Do not let solutions dry on wood surface- keep wet).

    d. Wash surface with clean water and allow surface to dry for 48 hours.

    e. For a high quality appearance, lightly sand wood with 180-220 sandpaper

  • You may also be interested in the following product(s)

  • Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

google-site-verification: google5dfe5011f1ce11f2.html