google-site-verification=KEs2Q_VNMOxxDFTZZjBxoDo_ARYARNDeHMnX3w8sZbA
 
 

Wood Finish Store

Teak Finish

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Teak Finish

Email to a Friend

Availability: In stock

Deprecated functionality: iconv_set_encoding(): Use of iconv.internal_encoding is deprecated in /home/woodfini/public_html/lib/Zend/Locale/Format.php on line 302
Add Items to Cart
OR

Quick Overview


TEAK FINISH




*Review(s)




Primo Teak Finish / Sealer  is an extremely durable, translucent, protective wood finish for interior and exterior use on boats. Primo Teak Finish provides a flexible, breathable finish with extreme ultraviolet and weathering protection for Teak and other woods commonly found on boats or as a priming coat only when used with Epoxy CLEAR SHIELD. Primo Teak Sealer may not be used below the waterline. 


Color: Teak-Tone color


 


Size: 1 Quart (946 ml)


 


Goes on smooth to leave a flawless finish that will hold up under the toughest conditions. Fast, even coverage, UV fade protection and water repellent. Dries to touch in 30 minutes, dries to handle in 24-48 hours.


 


 


•               Easy to use- single component Epoxy Oils 


 


•               Long Lasting Marine Grade 


 


•               UV fade protection & Water repellant


 


•               Teak Color pigment, natural teak look


 




                Money Back Guaranteed!! *  If you are not happy with Primo Teak Sealer, Return the product for a full refund. 


Product Description

We Also Recommend

Product Tags


 
  • CLEANING RECOMMENDATIONS:


    Surface should be clean, dull and dry before application. Remove gray, mildew or dirt before applying product. Penetrates best on new wood that is exposed to outdoor elements for 1-2weeks prior to staining or sealing. WARNING! If you scrape, sand or remove old paint, you may release lead dust. LEAD IS TOXIC. Contact the national lead information hotline at 1-800-424-LEAD or www.epa.gov/lead.


    If wood has a previous coating or is gray it must be cleaned prior to application of new coating.


    1. The best method to preparing wood surfaces is to sand with 80-150 grit sandpaper. Another alternative to sanding is to use example. Remove Gray on wood with a (TSP) solution or chemical brightener.


    a. Wet surface with clean water, do not let surface dry.


    b. Wash wood with 4 ounces of Powdered Tri-sodium Phosphate (TSP) or a phosphate free substitute with one gallon of water.


    c. Scrub surface with synthetic steel wood or a hard bristle brush and let solution sit on the wood for 10-15 minutes. (Do not let solutions dry on wood surface- keep wet).


    d. Wash surface with clean water and allow surface to dry for 48 hours.


    e. For a high quality appearance, lightly sand wood with 180-220 sandpaper.


    f. Remove all sanding dust with a broom or vacuum. Remove fine dust with acetone.


    WOOD PREVIOUSLY VARNISHED OR OILED: Test small area of wood to ensure adhesion and appearance. Discoloration in Varnish or oil must be removed prior to application of Primo Teak Sealer.


    If previous varnish /oil are discolored, thick, peeling or chipping old coating must be removed. It is NOT RECOMMENDED to apply Primo Teak Sealer over badly damaged wood prior to stripping old coating. Varnish / Oil can be removed by sanding with 60-80 grit sandpaper or the use of a chemical STRIPPER, follow instruction on can.


    APPLICATION TOOLS:


    1. For quick application use a staining pad or application pad. For High-end work use a long haired natural bristle brush or HPLV cup sprayer.           


    2. Use gloves and drop cloths to reduce mess.


     


    DIRECTION FOR USE:


    1. Remove lid and stir until completely mixed in can. (Do not shake)


    2. Make sure wood is dry and free from dust. Apply with an Application pad, long haired natural bristle brush or HPLV cup sprayer. Keep wet edges to prevent lap marks. (Do not apply in hot sun or wet weather. Only apply when surface and air temp is 50 F/10 C to 95 F/35 C.)


    3. For best performance we recommend a total of 2-3 coats with additional top coat of Clear Shield. Allow 24 hrs drying time between coats.


    4. For Smooth finishes allow 24 hours and lightly scuff surfaces in-between coats, use only a nylon scuffing pad (do not sand between coats)


    5. Clean brushes with mineral spirits or paint-thinner. Difficult stains may be cleaned with acetone or paint-thinner. Use soap and water to clean hands.


    MAINTENANCE:


    Maintenance coats should be routinely preformed by simply removing discoloration by sanding with 180-220 grit sandpaper and re-apply top coat of Primo Teak Sealer. If wood has been neglected, follow steps under CLEANING RECOMMENDATIONS. Although weathering and exposure conditions can vary widely, we recommend a maintenance coat every 2 to 3 years to compensate for environmental wear and tear. FOR MORE HOW TOO INFORMATION: visit us at www.primowoodproducts.com


     


    SPECIAL NOTE: Spills on gelcoat (fiberglass) should be wiped up immediately. If gelcoat becomes stained, clean with mineral spirits. Difficult stains may be cleaned with acetone, but DO NOT allow excess acetone to remain on gelcoat.


     


    COVERAGE: Varies with wood porosity, but generally 85 ft per quart.


    NOTE: Before job application prepare a two coat test sample on your wood to confirm desired color result. Continuous high humidity and/ or poor ventilation of the wood substrate may cause failure of this product. 

  • You may also be interested in the following product(s)

    Epoxy Clear-Coat

    Epoxy Clear-Coat
    Deprecated functionality: iconv_set_encoding(): Use of iconv.internal_encoding is deprecated in /home/woodfini/public_html/lib/Zend/Locale/Format.php on line 302

    DECK Brightener (Removes Stains & Gray Wood), Gallon

     DECK Brightener (Removes Stains & Gray Wood), Gallon
    Deprecated functionality: iconv_set_encoding(): Use of iconv.internal_encoding is deprecated in /home/woodfini/public_html/lib/Zend/Locale/Format.php on line 302
       
  • Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

 
google-site-verification: google5dfe5011f1ce11f2.html