google-site-verification=KEs2Q_VNMOxxDFTZZjBxoDo_ARYARNDeHMnX3w8sZbA
 
 

Wood Finish Store

Stripper: Removes Paint, Varnish, Teak Oil & Paint

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

  • Stripper: Removes Paint, Varnish, Teak Oil & Paint
  • Stripper Sprayed on wood

Old Finnish Stripper

Email to a Friend

Be the first to review this product

Availability: Out of stock

$15.00

Quick Overview

Primo Wood Striper


Primo Wood Stripper is an extreme stripper for the toughest jobs. It is ideal for removing varnish, epoxy, oil based sealers and polyurethanes on furniture. Removes most coatings in 15 minutes or less. Formula clings to vertical surfaces without runs or drips.



  • Removes Varnish

  • Removes Paint

  • Removes old epoxy

  • Excellent on vertical surfaces

Product Description

We Also Recommend

Product Tags


 
  • Primo Wood Striper


     Primo Wood Stripper is an extreme stripper for the toughest jobs. It is ideal for removing varnish, epoxy, oil based sealers and polyurethanes on furniture. Removes most coatings in 15 minutes or less. Formula clings to vertical surfaces without runs or drips.


     DIRECTIONS FOR USE:


    1. Wear protective clothing, chemical-resistant gloves and chemical splash goggles.


    2. Application: Shake 1-2 minuets before use. Hold can in an upright position approximately 8" to 12" inches from surface. Hold can 8 to 12 inches away form surface, spray in a sweeping motion from side to side. Apply a generous coat of stripper to one small area at a time. Health safety risks will increase dramatically when used over large areas. If spray tip becomes clogged, remove from can and hold under hot water. Replace tip making sure arrow is aimed away from you.


    3. Allow stripper to sit on surface of wood for 5 to 10 minutes before scraping. Test a small area to see if finish is ready for removal. Then scrape off loosened finish by gently working in the direction of wood grain with a chemical-resistant plastic scraper or scraping tool. Wipe off sludge with rough cloth or medium syenthic steel wool (Do not use metal steel wool, steel wool will rust outdoors). Repeat application if old finish is still present. Protect surrounding area from overspray with a heavy plastic drop cloth. Do not use on linoleum, plastic, rubber, asphalt tile, fiberglass or other synthetics. Removers may harm these surfaces. For best results, use in temperatures between 65°F and 85°F, and away from strong breeze and hot sun. 

CLEAN UP: Clean up used rags, paper and waste promptly. Work area and tools can be cleaned up with soap and water. Wash arms and hands with cold water and soap.

  • You may also be interested in the following product(s)

  • Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

 
google-site-verification: google5dfe5011f1ce11f2.html